Service Checklist - Robin Hood Motors

Check operation of instruments gauges, all warning lights and horn.
Check operation of interior and exterior lights.
Check condition of front and rear (if fitted) wiper blades and operation of washers?
Check brake fluid level, top up if satisfactory (otherwise recommend & if agreed replace at extra cost).
Check battery terminals and security.
Check operation of clutch.
Check operation and travel of handbrake.
Check brake pedal operation and travel.

Check and inspect under body of vehicle for corrosion or damage.
Replace the oil filter.
Renew engine oil (includes fully synthetic oil if required).
Visually inspect condition and security of steering suspension mountings and gaiters.
Visually inspect Drive shaft joints for wear and gaiter condition and prop shaft joints for wear and condition.
Visually inspect exhausts system condition for security and leakage.
Visually inspect security and condition of fuel lines, brake pipes, flexible hoses and handbrake cables.
Visually inspect for any visible signs of brake fluid leakage on front and rear back plates (wheels not removed).
Visually inspect front and rear shock absorber and suspension for condition and leakage.
Check condition of all tyres and check and adjust tyre pressures.
Check wheel bearings for excess play or noise.
Check and advise on timing belt replacement interval (if requested, extra cost).

Check operation of instruments gauges all warning lights and horn.
Check operation of interior and exterior lights.
Check condition of front and rear (if fitted) wiper blades and operation of washers, top up fluid.
Check brake fluid level, top up if satisfactory (otherwise recommend & if agreed replace at extra cost).
Check clutch and power steering fluid level (if applicable), top up.
Check battery terminals and security.
Replace spark plugs (long life / iridium spark plugs will incur an extra charge if due).
Check operation and travel of handbrake.
Check brake pedal operation and travel.

Check (where fitted) power assisted steering belt or auxiliary drive belt for condition and adjustment.
Check engine and gearbox mountings for security and wear.
Check and inspect under body of vehicle for corrosion or damage.
Visually inspect radiator/cooling system for leaks and check condition of hoses.
Replace oil filter.
Replace engine oil (includes fully synthetic oil if required).
Replace air filter.
Check front and rear brake pad discs and measure thickness
Visually inspect condition and security of steering rack: suspension, mountings and gaiters.
Visually inspect track rod ends,ball joints for condition wear and security.
Visually inspect drive shaft joints for wear and gaiter condition and prop shaft joints for wear and condition.
Visually inspect exhausts system condition,security and leakage.
Visually inspect security and condition of fuel lines, brake pipes, flexible hoses and handbrake cables.
Check for any visible signs of brake fluid leakage on front and rear back plates
Visually inspect front and rear shock absorber, suspension and mountings, for wear, condition and leakage.
Check all tyres for condition and wear, check and adjust all tyre pressures.
Check wheel bearings for excess play or noise.
Check and advice on timing belt replacement interval.